OSHA requirements, in plain English

Each standard below has its own training obligation, its own paperwork, and its own way of going wrong. Read the ones that sound like your shop — or let the free check tell you which ones apply.

Find out which apply to me

29 CFR 1910.1200

Hazard Communication

Employees are exposed to hazardous chemicals in the workplace.

29 CFR 1910 Subpart I

Personal Protective Equipment

PPE is used or required for the hazards you identified.

29 CFR 1910.38

Emergency Action Plan

Nearly every employer with an emergency response obligation needs one.

29 CFR 1910.39 / 1910.157

Fire Prevention & Extinguishers

Portable extinguishers and fire hazards exist in nearly every workplace.

29 CFR 1910 Subpart D

Walking-Working Surfaces

Floors, aisles, stairs, and storage areas exist in every facility.

29 CFR 1903.2

Required Workplace Postings

Every covered employer must display the OSHA 'It's the Law' poster.

29 CFR 1904

Injury & Illness Recordkeeping

Your employee count and industry likely put you inside the recordkeeping rule.

29 CFR 1910.147

Lockout/Tagout (Control of Hazardous Energy)

Employees service or maintain machinery that can start unexpectedly.

29 CFR 1910 Subpart O

Machine Guarding

You operate machinery with moving parts, points of operation, or rotating shafts.

29 CFR 1910 Subpart S

Electrical Safety

Employees perform electrical work or use electrical equipment and cords.

29 CFR 1910.178

Powered Industrial Trucks (Forklifts)

Employees operate forklifts or other powered industrial trucks.

29 CFR 1910.28 / 1926 Subpart M

Fall Protection

Employees work on elevated surfaces.

29 CFR 1910.23

Ladder Safety

Employees use portable or fixed ladders.

29 CFR 1910.134

Respiratory Protection

Employees wear respirators, including voluntary dust-mask use.

29 CFR 1910.1030

Bloodborne Pathogens

Employees may be occupationally exposed to blood or other infectious materials.

29 CFR 1910.146 / 1926 Subpart AA

Permit-Required Confined Spaces

Employees enter spaces with limited entry and exit.

29 CFR 1910 Subpart Q

Welding, Cutting & Brazing

Employees perform hot work.

OSH Act General Duty Clause; state heat rules

Heat & Outdoor Work

Employees work outdoors and can be exposed to heat and cold stress.

General Duty Clause; DOT where applicable

Driver & Fleet Safety

Employees drive as part of their job.

29 CFR 1926 Subpart O / General Duty Clause

Heavy Equipment & Struck-By Hazards

Employees work on foot around heavy equipment.

OSHA multi-employer citation policy; TWI guidance

Contractor & Temporary Worker Safety

Contractors or temp workers perform work at your facility.

Start my free OSHA check